8 Best 10×10 Tent Footprints for Canopy Camping (2026)

A 10 x 10 ft gray ground tarp weighing 3 lbs that fits E-Z UP straight canopies, Camping Cubes, and Screen Cubes.

Pros

• +Fits 10 x 10 straight canopies and E-Z UP cube tents
• +3 lb weight manageable for car camping and basecamp
• +Included tote bag simplifies storage and transport
• +One-year warranty stated on the listing

Cons

• −Adds 3 lbs and bulk for backpackers counting ounces
• −Canopy shelter sold separately, not included with tarp
• −No waterproof rating stated beyond ground barrier use

The E-Z UP Footprint P100 measures 10 x 10 ft, or 100 sq ft, and weighs 3 lbs. That footprint covers the full floor area of any 10 x 10 straight-leg E-Z UP shelter, Camping Cube, or Screen Cube, so the barrier sits between your shelter floor and whatever the ground offers at a campsite or festival pitch.

At 3 lbs, I see this working best for car camping, tailgates, and basecamp setups where a few extra pounds in the tote bag are not a concern. The included tote bag keeps the tarp bundled between trips, and the gray color hides dirt better than a bright fabric would.

Worth knowing before you buy: the canopy shelter is sold separately, and the listing does not state a waterproof rating for the tarp itself. I rate this a reasonable pick for anyone already running an E-Z UP 10 x 10 who wants a dedicated ground layer underneath it.

The Clostnature 118x118in footprint is a 22 oz ground sheet made from 210T ripstop polyester with a waterproof coating, sized for the brand's 6-person tent.

Pros

• +22 oz packed weight suits backpacking without a heavy penalty
• +210T ripstop polyester handles abrasive ground under a tent
• +Drawstring storage bag keeps footprint compact in a pack
• +One-year guarantee covers material and workmanship defects

Cons

• −Sized only for Clostnature 6-person tents, not universal
• −No hydrostatic head rating disclosed for the waterproof coating
• −Stakes and guy lines sold separately for tarp shelter setups

The Clostnature 118x118in footprint is a 22 oz ground sheet in 210T ripstop polyester, sized to match the brand's 6-person tent. That weight is light enough that I would not hesitate to carry it on a multi-day backpacking loop, where a footprint protects the tent floor from abrasion on granite or gravel pitches.

Beyond tent duty, the 118-inch square works as a sunshade, beach mat, or hammock rain fly. The ripstop weave resists tearing if a corner snags on brush, though the listing does not state a hydrostatic head rating, so I would treat the coating as water-resistant rather than fully waterproof.

Worth knowing before you buy: this footprint is cut for Clostnature 6-person tents, so it will not fit other shelters without trimming or folding. I rate it a reasonable pick for campers already using that tent who want a packable, multifunctional ground layer.

A 10x10 ground tarp from Kodiak Canvas with 11-mil thickness and rustproof aluminum grommets, weighing 2.2 pounds.

Pros

• +Rope-reinforced welded hem for durability at tie-down points
• +Rustproof aluminum grommets resist corrosion over repeated wet camps
• +Plastic-reinforced corners add abrasion resistance at stake points

Cons

• −2.2-pound weight is heavy for backpacking or thru-hiking trips
• −No stuff sack or carry bag listed as included with purchase
• −Only one size offered, limiting fit for smaller or larger tents

Kodiak Canvas builds this ground tarp specifically for its own tent line, and the 11-mil thickness is the detail that separates it from a generic blue poly tarp. That extra material matters when you are pitching on gravel, packed dirt, or a rough forest floor where a thin sheet would abrade through in a season of use. The rope-reinforced, welded hem and plastic-reinforced corners back up the grommet points, which is where most cheap tarps fail first.

At 2.2 pounds, this is not a tarp I would carry on a multi-day backpacking loop. The weight and the 10x10 footprint make it a car camping or basecamp item, sized to sit under a Kodiak Canvas tent rather than to double as a lightweight shelter. The rustproof aluminum grommets are a sensible touch for wet shoulder-season weekends when steel hardware would start pitting.

The main trade-off is that no stuff sack or carry bag appears in the listing, so you will need to supply your own storage. I see this working best for someone who already owns a Kodiak Canvas tent and wants a dedicated floor protector for established campsites.

The REDCAMP 14x9 ft tent footprint is a 210T ripstop polyester ground cloth rated PU2000mm, weighing 2.11 lbs.

Pros

• +Large 173 x 108 inch coverage suits 7 to 10 person tents
• +210T ripstop polyester with PU2000mm waterproof coating
• +Packs to 5 x 11 inches at 2.11 lbs
• +365-day limited manufacturer warranty

Cons

• −No stake or tie-out hardware included for canopy setup
• −At 2.11 lbs, heavier than ultralight footprint options

At 173 x 108 inches, this 210T ripstop polyester footprint is sized for 7 to 10 person tents, so it suits family car camping and base camp setups rather than solo shelters. The PU2000mm coating gives it a water-resistant layer under the tent floor, which helps on damp ground after rain.

I'd consider this for group trips where a large tent needs floor protection. The 2.11 lb weight and 5 x 11 inch packed size are manageable for car camping, though backpackers counting ounces will notice it. It also ties off as a sun or rain canopy, but no stakes or cord are included.

Worth knowing before you buy: the 365-day limited warranty covers defects, but the tarp ships alone. For my money, this suits car campers and large-tent users who want a simple ground layer.

The CORE 10x10 Screen House Footprint is a 120 x 120 inch ground tarp with elastic corner loops, sized to fit the CORE Instant Screen House model 40212.

Pros

• +Exact 10 x 10 ft size for the CORE model 40212 screen house
• +Elastic loops on all four corners simplify staking and removal
• +Compact 13 x 10 x 3 inch packed size stores in a camp bin
• +Gray tarp doubles as a picnic or tailgate ground sheet

Cons

• −Fits only the CORE 10x10 screen house, not other shelters
• −No waterproof or hydrostatic head rating stated in the listing
• −Stakes not listed as included with the footprint

The CORE 10x10 Screen House Footprint is cut to a 120 x 120 inch square, the same base dimension as the CORE Instant Screen House model 40212. If you run that specific shelter, this is a direct-fit ground layer rather than a generic tarp you trim to size. The elastic loops on all four corners are the practical detail here: they hold the footprint in place while you stake the screen house over it, so the corners do not shift as you work around the frame.

At 13 x 10 x 3 inches packed, it stores flat in a car camping tote or under a seat, which suits basecamp setups and tailgate days more than long backcountry carries. I'd consider it for a weekend car camping pitch where the screen house goes over dirt, gravel, or damp grass and you want a barrier between the floor and the ground.

Worth knowing before you buy: the listing states no waterproof rating or hydrostatic head, and stakes are not listed as included. It is also sized only for that one CORE model. For my money, this suits CORE 40212 owners who want a matched ground sheet, not a universal tarp.

The CORE 12x10 Instant Screen House Footprint is a 12 by 10 foot ground tarp with elastic corner loops, sized for CORE screen house models 40056 and 40213.

Pros

• +Elastic corner loops speed up staking under the screen house
• +Compact 16 by 12 by 3 inch packed size stores easily
• +Exact 12 by 10 foot fit for CORE models 40056 and 40213
• +Multipurpose as a picnic or tailgate ground cover

Cons

• −Fits only CORE 12x10 screen house models 40056 and 40213
• −No waterproof rating stated, so listed as weather protective only
• −Thin 0.04 inch sheet offers limited cushioning on hard ground

The CORE 12x10 Screen House Footprint is cut to match the floor of CORE's 12 by 10 instant screen houses, specifically models 40056 and 40213. That exact sizing matters because a footprint that overhangs collects rain, while one that runs short leaves bare ground exposed at the corners. Elastic loops on all four corners let me see this staking quickly under the shelter rather than threading cord through grommets.

At 16 by 12 by 3 inches packed, it stores in a gear bin or the back of a car without eating much space, which suits car camping and tailgate setups. The listing describes it as protection against water, tears, sharp rocks, insects, and moisture, and it also works as a standalone ground cover for picnics or painting projects. The 0.04 inch sheet is thin, so I would not count on it for cushioning over hard, rocky ground.

Worth knowing before you buy: no waterproof rating is stated, and it is built for those two CORE models only, so it will not fit other shelters. I rate it a sensible add-on for anyone already running a CORE 12x10 screen house.

The CORE 6 Person Tent Footprint is a 10 ft 6 in by 8 ft 6 in ground tarp that packs to 16 by 12 by 3 inches and fits specific CORE six-person cabin tent models.

Pros

• +Elastic corner loops simplify staking under the tent
• +Compact 16 by 12 by 3 inch packed size stores easily
• +Fits five named CORE six-person cabin tent models
• +Serves as a standalone ground cover for picnics and tailgates

Cons

• −Limited to specific CORE six-person cabin tent models
• −No waterproof rating or hydrostatic head stated
• −Stakes not listed as included with the footprint

The CORE 6 Person Tent Footprint measures 10 ft 6 in by 8 ft 6 in and packs down to 16 by 12 by 3 inches, a size that slides into most camp bins or a tent bag pocket. Elastic loops on all four corners let you stake it down before the tent goes up, which keeps the footprint aligned under the floor instead of shifting while you pitch.

Compatibility is the main thing to check. It fits CORE models 40007, 40161, 40156, 40216, and 40342, so I'd consider this only if your cabin tent is one of those. The listing does not state a waterproof rating, so I read it as a barrier layer rather than a standalone waterproof shelter.

Worth knowing before you buy: the footprint adds another item to pack, and stakes are not listed as included. I see this working best for car campers on established sites who want a replaceable ground layer under a CORE cabin tent.

A 10x10 hexagonal tent footprint in 210D polyester with PU coating, plus six pegs and a storage bag.

Pros

• +210D polyester with PU coating resists ground moisture
• +Hexagon shape covers corners under 10x10 canopies
• +Drawstring storage bag keeps footprint bundled
• +Six ground pegs included for immediate pitching

Cons

• −No packed weight listed, so carry bulk is unclear
• −Hexagon may not fit rectangular tent floors cleanly
• −PU coating needs reapplication over time

The MASTERCANOPY 10x10 hexagonal footprint is built from 210D polyester with a PU coating, a fabric weight that favors abrasion resistance over ultralight packing. The hexagon shape is the real story here: it spreads coverage under pop-up canopies and screen house rooms where a square mat would leave corners exposed. I see this working best as a barrier between a tent floor and damp forest ground or rocky campsites.

Deployed at 121.3 by 139.8 inches, it covers a generous footprint, and the included six ground pegs let you stake it down without hunting for extras. It folds into a drawstring bag for storage between trips, though the listing does not disclose a packed weight, so I cannot say how much room it takes in a pack. That matters if you plan to carry it on a backpacking loop rather than leave it at a car campsite.

The main trade-off is shape: a hexagon will not match a rectangular tent floor edge to edge, so some corners may sit uncovered. For canopy bases, picnic ground cover, or festival campsites, that geometry is an advantage. I rate it a reasonable pick for car camping and pop-up shelter use, not for weight-conscious backpackers.